$ 0xFFFF -h
0xFFFF v0.3 // The Free Fiasco Firmware Flasher
-b [arg] boots the kernel with arguments
-c console prompt mode
-C [/dev/mtd] check bad blocks on mtd
-d [vid:pid] injects a usb device into the supported list
-D [0|1|2] sets the root device to flash (0), mmc (1) or usb (2)
-e [path] dump and extract pieces to path
-f <flags< set the given RD flags (see '-f help')
-F [fiasco] flash a fiasco firmware image
-h show this help message
-H [file] calculate hash for file
-i show device information (let standby mode)
-I [piece] identify a firmware piece
-l, -L list supported usb device ids
-p [[p%]file] piece-of-firmware % file-where-this-piece-is
-r [0|1] disable/enable R&D mode
-R reboot the omap board
-s [serial] serial port console (minicom like terminal)
-u [fiasco] unpack target fiasco image
-U [0|1] disable/enable the usb host mode
-v be verbose and noisy
-V show 0xFFFF version information
-x extract configuration entries from /dev/mtd1
Pieces are: xloader secondary kernel initfs rootfs omap-nand